Author Topic: FT-4 Digital Protocol  (Read 105 times)

sv5fri

  • Global Moderator
  • Newbie
  • *****
  • Posts: 25
  • Karma: +0/-0
    • http://www.sv5fri.eu
FT-4 Digital Protocol
« on: April 23, 2019, 05:23:45 AM »
A new, speedier, more contest-friendly digital mode is just days away in beta version. WSJT-X Developers say serious work on the new FT4 protocol began shortly after the FT8 Roundup held last December 1 – 2. The goal was a mode that could compete with RTTY contesting in terms of contact rates, while preserving many of the benefits of FT8.

“Over the past month a small group of volunteers have been conducting on-the-air tests of FT4,” the WSJT-X Development Group — Joe Taylor, K1JT; Steve Franke, K9AN; and Bill Somerville, G4WJ — announced this week. “The early tests were very successful and helped us to make a number of important design decisions. We believe FT4 has considerable promise for its intended purpose.”

The developers say FT-4 soon will be ready for testing by a larger group and they’re seeking interested participants who can offer their “considered feedback.” They suggest reading The FT4 Protocol for Digital Contesting first.

According to the document FT4 is an experimental digital mode designed specifically for radio contesting that — like FT8 — uses fixed-length transmissions, structured messages with formats optimized for minimal contacts, and strong forward-error correction. Transmit-receive sequences are 6 seconds, making it 2.5 times faster than FT8 and about the same speed as conventional RTTY for radio contesting. FT4 can work with signals 10 dB weaker what would be required to decode RTTY while using much less bandwidth.

Transmissions last for 4.48 seconds, compared to 12.64 seconds for FT8. Modulation uses four-tone frequency-shift keying at approximately 23.4 baud, with tones separated by the baud rate. The occupied bandwidth is 90 Hz.

“We plan to post downloadable installation packages for WSJT-X version 2.1.0-rc5 (-rc versions are so-called "release candidate" software) on Monday, April 29,” the Development Group said. The FT4 Protocol for Digital Contesting document includes:

Instructions for installing WSJT-X 2.1.0-rc5 and configuring FT4.

FT4 operating instructions.

A basic description of the FT4 protocol, modulation, and waveform.

Detailed sensitivity measurements for FT4 under a wide variety of simulated propagation conditions.

A schedule of upcoming test sessions.


http://physics.princeton.edu/pulsar/k1jt/FT4_Protocol.pdf
« Last Edit: May 12, 2019, 09:16:16 PM by dxadmin »
73 de Yiannis, SV5FRI
http://www.sv5fri.eu
DxCluster: dxc.sv5fri.eu:7300
 

KE3GK

  • Newbie
  • *
  • Posts: 15
  • Karma: +0/-0
RE: FT-4 Digital Protocol
« Reply #1 on: May 04, 2019, 04:56:50 AM »
Quote from: "sv5fri" pid='453' dateline='1555997025'

[align=justify]A new, speedier, more contest-friendly digital mode is just days away in beta version. WSJT-X Developers say serious work on the new FT4 protocol began shortly after the FT8 Roundup held last December 1 – 2. The goal was a mode that could compete with RTTY contesting in terms of contact rates, while preserving many of the benefits of FT8.

“Over the past month a small group of volunteers have been conducting on-the-air tests of FT4,” the WSJT-X Development Group — Joe Taylor, K1JT; Steve Franke, K9AN; and Bill Somerville, G4WJ — announced this week. “The early tests were very successful and helped us to make a number of important design decisions. We believe FT4 has considerable promise for its intended purpose.”

The developers say FT-4 soon will be ready for testing by a larger group and they’re seeking interested participants who can offer their “considered feedback.” They suggest reading The FT4 Protocol for Digital Contesting first.

According to the document FT4 is an experimental digital mode designed specifically for radio contesting that — like FT8 — uses fixed-length transmissions, structured messages with formats optimized for minimal contacts, and strong forward-error correction. Transmit-receive sequences are 6 seconds, making it 2.5 times faster than FT8 and about the same speed as conventional RTTY for radio contesting. FT4 can work with signals 10 dB weaker what would be required to decode RTTY while using much less bandwidth.

Transmissions last for 4.48 seconds, compared to 12.64 seconds for FT8. Modulation uses four-tone frequency-shift keying at approximately 23.4 baud, with tones separated by the baud rate. The occupied bandwidth is 90 Hz.

“We plan to post downloadable installation packages for WSJT-X version 2.1.0-rc5 (-rc versions are so-called "release candidate" software) on Monday, April 29,” the Development Group said. The FT4 Protocol for Digital Contesting document includes:

Instructions for installing WSJT-X 2.1.0-rc5 and configuring FT4.

FT4 operating instructions.

A basic description of the FT4 protocol, modulation, and waveform.

Detailed sensitivity measurements for FT4 under a wide variety of simulated propagation conditions.

A schedule of upcoming test sessions.


http://physics.princeton.edu/pulsar/k1jt/FT4_Protocol.pdf[/align]



I will give FT4 a try later, after more testing done by the beta testers.  I am afraid that it will mess up my FT8 software.   ;)

Tom KE3GK